2manyoranges
Old School Grand Master
- Feedback
- View
A couple of years ago I sold my Series 1 420mm Syncros - with the Wheel n Hammer logo. Gorgeous thing, but all my frames have moved to 31.6 or such, and it had just sat in the seatpost box for eons and I thought it better that someone uses it...and then...bought a COTIC SIMPLE here and YES....27.2....
I retained a 330 27.2 Syncros because...well...because...because I couldn't bring myself not to have a Syncros seatpost. This is a 330 27.3 series 3 I think...brass inserts for the bolts, lateral hole in the bottom of the tube to lighten it. Syncros as a word vertically down the side, with 7075-T5 labelling. Condition is 7/10 - logo worn and anodising worn.
I would very much like a 400+ in ANY condition - as long as it is mechanically sound I'll take terrible cosmetic condition since this will be very well used in the grottiest of conditions.
I'll swap the 330 plus a balancing payment as needed....
PM if you have anything embarrassing you want to swap for something reasonably decent.
I retained a 330 27.2 Syncros because...well...because...because I couldn't bring myself not to have a Syncros seatpost. This is a 330 27.3 series 3 I think...brass inserts for the bolts, lateral hole in the bottom of the tube to lighten it. Syncros as a word vertically down the side, with 7075-T5 labelling. Condition is 7/10 - logo worn and anodising worn.
I would very much like a 400+ in ANY condition - as long as it is mechanically sound I'll take terrible cosmetic condition since this will be very well used in the grottiest of conditions.
I'll swap the 330 plus a balancing payment as needed....
PM if you have anything embarrassing you want to swap for something reasonably decent.
Last edited:
