drive side rear cone for a XTR M950 hub

[Frank Z]

As stated: drive side rear cone for a XTR M950 hub. Seems that Shimano can't deliver them anymore.

 

[PedalCarlPedal]

have you got an exploded diagram or a picture of the cone you need?

we have various ones at work and MAY be able to help you out.

Thanks

Carl

 

[Frank Z]

Thanks for your reply. The Shimano part nr is Y23R98020 but it doesn't seem to be available. Measurements: diameter 15,9 mm, length 12,5 mm. It looks like the Wheels Manufacturing CN-RO01. Can't attach pdf-files unfortunately.

 

[FluffyChicken]

But you can link to it.

Anyways just search it in google
http://wheelsmfg.com/tech/PDF/wheels_cone_chart.pdf
shows it's not the right one and they don't make one. Though at Petra Cycles they do seem to have the complete axle assembly.

and
http://wheelsmfg.com/shimano-rear-hub-a ... cone-chart

Doesn't mean you couldn't engineer somethign else to fit.

 

[Frank Z]

Yep, that's true. I could have linked to them.

As far as engineering is concerned, I figured I could use an XT HB-M737 drive side cone and the accompanying antidustring'ring'-thingy. Haven't tried it yet. I will let you know if it works. Still appreciate suggestions though, or an original cone.

 

[tonedeaf101]

Im after the non drive side for exact same hub.
I'm looking into an engineered repair. I have an old axle in my bits box, with cones that look identical. I know they are not XTR, sadly I dont know what M number they are either. Gonna try and rebuild it on weekend and see how it feels.
Shame we cant get them anymore. The wheel and hub is otherwise fine for my case.

 

[FluffyChicken]

Y32T98030 should work for the drive side.
and
Y32T98040 for the none drive left side

they are M960/5 and Google picks some up.

otherwise get the length right overall (12.5mm and 16mm) for 9 x 1/4" bearing and ignore the shielding.

 

[tonedeaf101]

Damn, all out of stock. This is pants!!

 

[Frank Z]

Y32T98030 should work for the drive side.
and
Y32T98040 for the none drive left side

they are M960/5 and Google picks some up.

otherwise get the length right overall (12.5mm and 16mm) for 9 x 1/4" bearing and ignore the shielding.

Thanks! I'm gonna check with a nearby Shimano Service Center.

Damn, all out of stock. This is pants!!

Could check for a non-drive side cone, if you want?

 

[tonedeaf101]

That would be great