Help needed with old Jamis Dakar chainstay bushes

[d00m]

This post marks my return to the world of retro bikes after years in the wilderness!

I have scored myself a 1999 jamis dakar sport, all original and in need of some love!

I've managed to find replacement bushes for the main pivot and the rocker pivot but I'm struggling to work out the appropriate size and type for the chainstay pivots. All I have is a nut and bolt holding them together. I assume it needs two flanged bushes either side of the chainstay but unsure whether or not it needs a sleeve bush to go inside these, through which the bolt would then pass...

Any help is greatly appreciated

 

[d00m]

Bump, anyone?

 

[trailstar82]

This was all I found @d00m

https://web.archive.org/web/20060506181116/http://www.jamisbikes.com/tech_lounge/SPORT_TECH_PAGE.pdf
Otherwise you could do worse that shooting a message over to BETD with a pic of what you need.

https://www.mountainbikecomponents.co.uk/photo-help/

 

[d00m]

You sir are a diamond! Found a couple of useful images in the pdf illustrating what needs to go in there. I need to do some measuring now

 

[trailstar82]

You sir are a diamond! Found a couple of useful images in the pdf illustrating what needs to go in there. I need to do some measuring now

The wayback machine doing a lot of heavy lifting, glad it helps!

 

[d00m]

Good old wayback machine. Time to get my vernier caliper out...