My Merckx

Time to strip the front hub, loose axle and a redish required. Thankfully upon cleaning, discovered everything to be undamaged. So repacked with grease and straightened the wheel. Ready for rubber!
 

Attachments

  • IMG_20210516_153334154.webp
    IMG_20210516_153334154.webp
    198.5 KB · Views: 3
  • IMG_20210516_153717776.webp
    IMG_20210516_153717776.webp
    243.8 KB · Views: 3
  • IMG_20210516_154225799.webp
    IMG_20210516_154225799.webp
    357 KB · Views: 5
  • IMG_20210516_154240118.webp
    IMG_20210516_154240118.webp
    184.7 KB · Views: 3
  • IMG_20210516_155249535.webp
    IMG_20210516_155249535.webp
    155.4 KB · Views: 3
  • IMG_20210516_160344609.webp
    IMG_20210516_160344609.webp
    281.3 KB · Views: 4
  • IMG_20210516_163737271.webp
    IMG_20210516_163737271.webp
    871 KB · Views: 5
Waiting to be flamed, but a Shimano headset going back in.
I know it won't last, but scrubbed the tyres. I was thinking of getting blue, but had these and add a nice colour match I think. So, here it is so far
 

Attachments

  • IMG_20210522_174534262.webp
    IMG_20210522_174534262.webp
    436.4 KB · Views: 15
  • IMG_20210522_182314577.webp
    IMG_20210522_182314577.webp
    753.8 KB · Views: 14
  • IMG_20210522_185853782.webp
    IMG_20210522_185853782.webp
    351.5 KB · Views: 14
Looking good Mike! I've always had a thing for this colour scheme too.

what size front mech do you need?
 
Looking good Mike! I've always had a thing for this colour scheme too.

what size front mech do you need?
Thanks mate, it's a braze on mech I need.
The colour scheme takes me straight back to being at Paris Roubaix in 2001. As the riders came past near the end, all you could make out of the riders were lips and eyes. Everything else was grey 😂
 
If I'd looked properly at the photos I'd have seen it was a braze on mech 🤦 can't help with that unfortunately.
 
Back
Top