'REAL' square taper bottom bracket.

[IDB1]

It was fitted and done maybe 10 miles.. on assembly I added the extra bearings for smoother running and longevity (apparently)..

Bit coppaslippy in the pic will be able to do a freshly wiped down pic tomorrow (and a length measurement too).
£25 inc UK mainland post

 

[Minifreak]

If this happens to be 68mm shell with an axel length around 119mm can I bags it please

 

[IDB1]

I shall measure it tomorrow for you bud.. yours if it's the right size and that...

 

[Minifreak]

Thank you

 

[IDB1]

Sorry bud... 73 x 113... I think the shell width can be adjusted by removing spacers in the middle but that would require taking bearings off and stuff.

 

[Minifreak]

No worries

 

[ishaw]

These were designed to fit 68 or 73 shells by using different combinations of needlessly, but cool anodised spacers. You shouldn't need to take out the bearings as they slide off the axle.

I've got a couple of nos ones in various axle sizes if anyone's interested, I may part with one once I work out what one I need to keep.

 

[IDB1]

These were designed to fit 68 or 73 shells by using different combinations of needlessly, but cool anodised spacers.

That's what I thought was the case but couldn't remember 100%..

 

[ishaw]

I've got a set of instructions if anyone needs them, possibly already scanned in the archive somewhere I think.

 

[Minifreak]

Ian if you have one with anything close to 119mm axel length please let me know if you intend to sell. Thanks